橋式起重機安全操作規程

橋式起重機是製造工廠不可或缺的主力, 建築工地, 倉庫, and logistics hubs. These powerful machines streamline heavy lifting tasks, boost productivity, and enable the movement of loads that would otherwise be impossible for manual labor. 然而, their immense power and complexity also pose significant safety risks—from load drops and structural failures to collisions and operator injuries—if not operated with strict adherence to safety protocols. 在這個博客中, we’ll break down the essential safety operating procedures for overhead cranes, designed to protect operators, bystanders, 裝置, and valuable assets.​

Pre-Operation Inspection: Lay the Foundation for Safety​

Before powering up an 橋式起重機, a thorough pre-operation inspection is non-negotiable. This step identifies potential hazards early, preventing accidents before they occur. Here’s what operators must check:​

• 1. Visual and Physical Checks: Inspect the crane’s structure, including the bridge, 手推車, 提升, and runway rails, for signs of damage (例如。, 裂縫, bent components, 或腐蝕). Ensure all fasteners, 螺栓, and pins are secure and not loose.​

• 2. Load-Bearing Components: Examine wire ropes or chains for wear, fraying, 扭結, or broken strands. Check hooks for deformation, 裂縫, or excessive wear—never use a hook with a damaged latch. Verify that sheaves and drums are in good condition, with no grooves or damage that could compromise the rope.​

• 3. Mechanical and Electrical Systems: Test the crane’s brakes (both hoist and travel brakes) to ensure they engage smoothly and hold loads securely. Check hydraulic or pneumatic systems for leaks. Inspect electrical connections, 電纜, 和控制 (例如。, 吊墜, remote, or cabin controls) 對於損壞, fraying, or malfunctions. Ensure emergency stop buttons are functional and easily accessible.​

• 4. 安全裝置: Confirm that all safety features are operational, including overload limit switches (prevents lifting loads beyond the crane’s capacity), 防碰撞系統 (for multi-crane operations), 限位開關 (prevent over-travel of the trolley or bridge), and warning devices (horns, lights, or alarms).​

• 5. Work Area Assessment: Survey the lifting area to remove obstacles, clear pedestrians, and mark a safe zone (using barriers or caution tape if necessary). Check for overhead power lines—maintain the minimum safe distance as required by local regulations (通常 10 feet or more for low-voltage lines). Ensure the load is balanced and properly secured with slings or shackles.​

During Operation: Follow Best Practices for Safe Lifting​

Once the pre-operation inspection is complete and the work area is secure, operators must adhere to these critical procedures during crane use:​

• 1. Operator Competence: Only trained and certified operators should operate an overhead crane. Never allow unauthorized personnel to use the controls, and avoid distractions (例如。, phone calls, conversations) while operating the crane.​

• 2. Smooth Movements: Avoid sudden starts, 停止, or changes in direction—these can cause the load to swing or shift, increasing the risk of accidents. Use gradual, controlled movements to lift, lower, and position the load.​

• 3. Load Handling: Never exceed the crane’s rated capacity. If the load weight is unknown, use a scale to weigh it first. Keep the load as low as possible during travel to minimize swing, and never drag or pull a stuck load—this can overload the crane or damage the rope. Avoid lifting loads over people, and never stand under a suspended load (even for a moment).​

• 4. 溝通: Establish clear communication with spotters or ground personnel using standard hand signals (例如。, lift, lower, 停止, swing) or two-way radios. Ensure all parties understand the signals to avoid miscommunication. If visibility is poor (例如。, due to dust, darkness, or obstacles), use a spotter to guide the operation.​

• 5. Monitoring Equipment: Continuously monitor the crane’s performance during operation. If you notice unusual noises (例如。, 磨削, squealing), vibrations, or malfunctions (例如。, brakes failing, controls unresponsive), stop the operation immediately, lower the load safely (if possible), and shut off the power. Report the issue to a supervisor before resuming use.​

• 6. Weather Considerations: Avoid operating the crane in extreme weather conditions (例如。, 大風, heavy rain, 閃電) unless the crane is designed for such environments and proper safety measures are in place. High winds can cause loads to swing uncontrollably, while lightning poses an electrical hazard.​

Post-Operation: Secure the Crane and Document Inspections​

After completing the lifting task, operators must follow these steps to ensure the crane is safely secured and ready for the next use:​

• 1. Park the Crane Properly: Move the crane to a designated parking area, away from work zones and pedestrian traffic. Lower the hoist hook to the lowest position (or as per company policy) and engage the brakes. Turn off the power to the crane and lock the control panel to prevent unauthorized use.​

• 2. Secure the Load Area: Remove slings, 鐐銬, or other lifting accessories and store them in a designated location. Clean up the work area to remove debris or obstacles.​

• 3. Document Inspections and Issues: Record the pre-operation inspection results, any issues encountered during operation, and maintenance needs in the crane’s logbook. This documentation helps track the crane’s condition over time, identify recurring problems, and ensure compliance with safety regulations.​

• 4. Report Incidents: If an accident, near-miss, or equipment failure occurs during operation, report it to a supervisor immediately. Include details such as the date, time, location, nature of the incident, and any injuries or damage. Conduct a root-cause analysis to prevent similar incidents in the future.​

Regular Maintenance: Extend Equipment Life and Ensure Safety​

In addition to pre and post-operation inspections, regular maintenance is critical to keeping overhead cranes safe and reliable. Employers should establish a preventive maintenance schedule based on the manufacturer’s recommendations and local regulations. Key maintenance tasks include:​

• 1. 潤滑: Regularly lubricate moving parts (例如。, 軸承, 齒輪, 滑輪) to reduce friction and wear.​

• 2. Rope/Chain Maintenance: Replace worn, frayed, or damaged wire ropes or chains promptly. Inspect ropes for proper tension and alignment.​

• 3. Brake and Control System Checks: Test brakes, 電機, and control systems periodically to ensure they function correctly. Adjust or replace components as needed.​

• 4. Structural Inspections: Conduct annual or bi-annual structural inspections (by a qualified professional) to check for cracks, 腐蝕, or fatigue in the crane’s frame, 橋, and runway.​

• 5. Calibration: Calibrate overload limit switches and other safety devices regularly to ensure accuracy.​

結論: Safety Is a Collective Responsibility​

Operating an overhead crane safely requires more than just following procedures—it demands a culture of safety where operators, 督導員, and employers work together to prioritize risk mitigation. By conducting thorough pre-operation inspections, adhering to safe lifting practices, performing post-operation checks, and investing in regular maintenance, you can significantly reduce the risk of accidents and create a safer workplace for everyone.​

記住, when it comes to overhead crane safety, there’s no room for shortcuts. Every step of the process—from inspection to operation to maintenance—plays a vital role in protecting lives and assets. By staying vigilant, following best practices, and continuously training operators, you can ensure that your overhead cranes operate safely and efficiently for years to come.