Móc cần cẩu biển cho xưởng đóng tàu

Our Heavy-Duty Marine Móc cần cẩu is precision-engineered for the rigorous demands of shipyard lifting operations. Built to handle massive loads, resist harsh marine environments, and ensure maximum safety, this hook is the critical link between your crane and cargo—from engine blocks and steel plates to ship sections and dry-dock equipment.

Các tính năng chính & Những lợi ích

• 1. Uncompromising Strength & Độ bền

  • Vật liệu: Giả mạo từ thép hợp kim kéo cao (Grade 100/Alloy E), heat-treated for exceptional toughness.

  • Khả năng tải: Rated for SWL (Safe Working Loads) from 5 ĐẾN 500+ tấn. Custom designs available.

  • Kháng ăn mòn: Triple-protected with hot-dip galvanizing, marine-grade epoxy coating, or stainless steel variants (316L).

• 2. Tăng cường hệ thống an toàn

  • Latch an toàn: Mùa xuân tải, thủ công, or semi-automatic latches prevent accidental disengagement.

  • Overload Protection: Optional integrated load cells for real-time monitoring (API-compliant).

  • Fail-Safe Design: Fatigue-resistant construction per FEM 9.511 and ISO 4301/EN 13889 standards.

• 3. Optimized for Marine Workflows

  • 360° Rotation: Swivel hooks eliminate wire rope twisting during precise positioning.

  • Low-Profile Design: Clears confined shipboard spaces, decks, and dry-dock structures.

  • Shock Absorption: Resilient thrust bearings reduce dynamic stress during heavy lifts.

• 4. Smart Inspection & BẢO TRÌ

  • Wear Indicators: Visual markers highlight critical wear zones (cổ họng, mẹo).

  • Easy-Grease Fittings: Lubrication ports extend bearing/bolt life.

  • Truy xuất nguồn gốc: Laser-etched ID with SWL, số seri, and certification details.

MARINE CRANE HOOK TECHNICAL PARAMETERS

Tham số	Đặc điểm kỹ thuật
Model Series	MCH-SY (Tiêu chuẩn) / MCH-PLUS (Advanced)
Tải trọng làm việc an toàn (SWL)	5–500 tons
Design Safety Factor	≥ 5:1 (per ISO 4301)
Vật liệu	Alloy Steel (Grade 100/Alloy E)
Forging Process	Closed-die forging, ultrasonic tested
Điều trị nhiệt	Quenched & tempered (HRC 38-42)
Bảo vệ ăn mòn	Triple-layer: Zn-phosphating + HDG + epoxy coating (250μm)
Xoay vòng	360° continuous rotation
Bearing Type	Tapered roller thrust bearing (grease-lubricated)
Latch an toàn	Mùa xuân tải (tiêu chuẩn), semi-automatic, or RFID-sensor enabled
Operating Temp.	-40°C to +150°C
Fatigue Life	500,000 cycles @ 60% SWL (ISO 4301-5)
Wear Limit	Max 10% throat reduction / 5% hook tip deformation (ASME B30.10)
NDT Requirements	MPI every 6 months; UT for hooks >100 tấn
Certifications	DNV-GL, ABS, Lloyd’s Register, CCS, IRS
Kích thước (Ví dụ)	*MCH-SY 100-ton:* – Throat: 320 mm – Width: 180 mm – Height: 785 mm

Custom Engineering Services

Tailored Solutions for Complex Lifts:

Requirement	Our Capability
Extreme Environments	Arctic-grade hooks (-60° C.), explosive atmosphere (ATEX) variants
Non-Standard Loads	Asymmetric hooks for angled lifts, ergonomic grips for delicate components
Automation Ready	Robotic interface pads, auto-latching sensors, remote load telemetry
Retrofit Kits	Legacy crane upgrades with digital load cells + anti-collision systems

OPTIONAL FEATURES & ADD-ONS

Tính năng	Technical Value	Khả năng tương thích
Integrated Load Cell	±0.5% accuracy, 4-20mA/RS485 output	API 9B/ISO 17025 certified
Hệ thống chống đường	Active gyro damping (response time: <0.8 sec)	Crane PLC integration ready
RFID Monitoring	ISO 18000-6C tags (memory: 8 KB)	Synced with EAM/CMMS
ATEX Certification	Zone 1/21 (IIB+H2 T85°C)	Explosion-proof latches
Quick-Change Adapter	DIN 15403-compliant interface	For grabs, xiềng xích, or magnets

Upgrade to a Unified Lifting Ecosystem

• 1. Hook Blocks & Assemblies

  • Tandem Hooks: Multi-hook spreader beams for balanced lifting of irregular loads (VÍ DỤ., ship modules).

  • Rotating Sheaves: Integrated pulley systems reduce wire abrasion + enable vertical reeving (ISO 4309 compliant).

  • Anti-Sway Technology: Gyro-stabilized hooks with inertial dampeners for precision placement in windy docks.

• 2. Smart Attachments

  • RFID Tagging: Wireless load tracking + automated inspection logs (compatible with IoT crane platforms).

  • Vision-Assist Kits: Embedded cameras + LiDAR for blind-spot monitoring during confined space lifts.

  • Quick-Change Adapters: Interchangeable hook heads (clevis, grab, shackle) for rapid task switching.

Applications in Shipyard Operations

• 1. Dry-Dock Lifting: Hull sections, propellers, rudders.

• 2. Fabrication Shops: Steel plates, pipe racks, machinery.

• 3. Outfitting Quays: Engine installations, modular cabins.

• 4. Heavy Transport: Gantry crane operations, load-outs.

Why Choose Our Marine Crane Hook?

• Zero-Failure Legacy: 200,000+ hours operational reliability in global shipyards.

• Custom Engineering: Tailored shank lengths, latches, or RFID tags for digital fleet management.

• Global Compliance: Certified for EU, CHÚNG TA, and Asian maritime safety regimes.

Request a Quote or Technical Dossier

Upgrade your lifting safety with hooks built to withstand salt, storm, and strain. Contact our engineering team for load diagrams, CAD models, and rapid prototyping.

✉️ Aiden@craneweihua.com

🌐 www.globalweihua.com