Galvanized crane hook corrosion resistant

In industries where corrosion compromises safety and productivity, our Hot-Dip Galvanized Crane Hook delivers unmatched protection and reliability. Designed for the harshest conditions—from offshore platforms to chemical plants—this hook combines military-grade corrosion resistance with brute strength, ensuring your lifting operations never falter.

Why Galvanized? The Science of Survival

Unlike painted or electroplated hooks, our hot-dip galvanizing process (compliant with ISO 1461) submerges the forged steel hook in molten zinc at 450°C. This creates a metallurgical bond that:

• 1. Forms a triple-layer barrier (zinc-iron alloy + pure zinc) against rust, acids, and saltwater.
• 2. Provides sacrificial anode protection: Zinc corrodes first, preserving the steel even if scratched.
• 3. Withstands 1,000+ hours of salt spray testing (ASTM B117) without red rust.

Key Features & Engineering Advantages

• 1. Extreme Corrosion Resistance

  • Zinc coating thickness: 85–120μm (3–5x thicker than electroplating).
  • Resists pH 5–12 chemicals, UV degradation, and abrasive particulates.

• 2. Unrivaled Strength & Segurança

  • Forged from Grade 100/Alloy Steel (minimum tensile strength: 1,000 MPa).
  • Load-tested at 200% of WLL (Working Load Limit).
  • Non-sparking design for explosive atmospheres (ATEX optional).

• 3. Zero-Maintenance Durability

  • Service life: 25+ years in coastal/marine settings (per ISO 9224 corrosion category C5).
  • No recoating or inspections beyond standard rigging checks.

• 4. Intelligent Design

  • Self-lubricating swivel bearing (360° rotation under load).
  • Radiused throat geometry reduces wire rope wear by 40%.
  • Optional safety latch with positive-lock mechanism.

Technical Parameter Table

Parâmetro	Especificação	Testing Standard
Material	Alloy Steel (Grade 80/100/120)	ASTM A668 / EN 10025
Galvanizing	Hot-dip, min. 85μm	ISO 1461 / ASTM A123
WLL Range	0.5T – 500T	ASME B30.10
Fator de segurança	4:1 (min. breaking load = 4x WLL)	DE 15400 / Fem 9.511
Temperature Range	-40°C to +200°C	ISO 2408
Rotation	360° swivel (ball/roller bearing options)	ISO 17096
Compliance	ASME B30.10, EN 13889, ISO 2415, GOST 6627	Certified by DNV/GL, Lloyds

Applications Built for Extremes

• 1. Offshore & Marine: Oil rigs, estaleiros, subsea lifting.

• 2. Industrial: Chemical processing, acid storage, fertilizer plants.

• 3. Infrastructure: Bridges, dams, coastal construction.

• 4. Waste Management: Incinerators, scrap yards, wastewater facilities.

• 5. Agriculture: Fertilizer silos, irrigation systems.

Why Our Hook Outperforms Competitors?

Feature	Standard Hook	Our Galvanized Hook
Corrosion Life	3–7 years (painted)	25+ years
Coating Integrity	Prone to chipping	Self-healing zinc layer
WLL Consistency	Weakens with rust	Lifetime load stability
Total Cost	High (replacement/fixes)	Low (near-zero upkeep)

In accelerated corrosion testing, our hooks endured 300% longer than industry averages. That’s not just protection—it’s operational insurance.

Order Customization & Support

• Tailored Solutions: Shank lengths, latch types, or specialized alloys (Por exemplo, stainless steel core).

• Certification Packages: 3.1 Mill Certificate, EN 10204, NDT reports.

• Global Logistics: Crush-proof packaging, 24-hour dispatch.

Upgrade to Uncompromised Safety.

➡️ Contact our engineering team for a site-specific corrosion assessment and hook configuration.