Dépannage du bruit de crochet de grue

A crane is the heartbeat of many industrial operations, from construction sites to shipping yards. Its smooth, reliable operation is critical for safety and productivity. But when an unusual sound starts emanating from the hook block—a clunk, a grind, or a high-pitched squeal—it’s more than just an annoyance; it’s a symptom.

That noise is your crane’s way of crying out for help. Ignoring it can lead to catastrophic component failure, costly downtime, and serious safety hazards.

Understanding the language of these noises is the first step in effective troubleshooting. Let’s decode the common sounds and their likely culprits.

The High-Pitched Squealing or Screeching

This is one of the most common and unmistakable noises. It typically occurs during hoisting or lowering motions.

• 1. Most Likely Cause: Lack of lubrication on the hook block sheaves.
• 2. The Problem: The bearings or the pins that the sheaves (pulleys) rotate on are dry. Metal-on-metal contact creates intense friction, resulting in that ear-piercing squeal.
• 3. Troubleshooting Steps:
  1. Isolate the sound. visually inspect the hook block while operating the crane (safely and from a distance). Confirm the sound is coming from the sheaves.
  2. Check for grease. Look for old, hardened grease or a complete absence of lubricant.
  3. Action: Apply the manufacturer-recommended lubricant to all lubrication points on the hook block. Do not over-grease, as excess grease can attract dirt and debris.

The Grinding or Graunching Noise

This is a more serious, lower-pitched, rough sound. It feels and sounds like something is being chewed up.

• 1. Most Likely Cause: Severely worn or failed bearings.
• 2. The Problem: What started as a squeal (lack of lubrication) has progressed to complete bearing failure. The bearing rollers or races are now damaged and are grinding against each other instead of rotating smoothly.
• 3. Troubleshooting Steps:
  1. Stop operations immediately. A grinding noise indicates advanced wear. Continued use can cause the sheave to seize or the bearing to disintegrate.
  2. Inspect for play and damage. Try to wobble the sheaves. Any lateral movement indicates bearing wear. Look for metal shavings or discoloration around the sheave.
  3. Action: The hook block will likely need disassembly and the damaged bearings replaced by a qualified technician.

The Irregular Clicking, Popping, or Clunking

This sound is often rhythmic, happening once per revolution of a sheave, or during the start/stop of a movement.

• 1. Most Likely Cause:
  • A damaged or deformed sheave. A flat spot, dent, or crack on the sheave will “kick” the rope as it passes over, creating a regular click or pop.
  • A worn or damaged rope. A broken wire or a crushed section of the wire rope can also cause a clicking sound as it passes through the block.
• 2. Troubleshooting Steps:
  1. Visually track the rope. Watch the wire rope as it travels over the sheaves. See if the noise coincides with a specific point on the rope or sheave.
  2. Conduct a thorough inspection. Shut down the crane and lock it out. Carefully inspect each sheave for grooves, fissure, or damage. Run a rag along the wire rope (carefully!) to feel for broken wires or deformities.
  3. Action: Replace the damaged sheave or the wire rope. Running a damaged rope over a damaged sheave will accelerate the failure of both components.

The Rattling or Banging Sound

This is a loose, chaotic noise, often heard when the crane is traveling or when a movement starts or stops abruptly.

• 1. Most Likely Cause: Worn or damaged hook latch or loose components.
• 2. The Problem: The safety latch is worn, bent, or its spring is broken, causing it to flap around and rattle. Alternatively, internal components like spacers or bushings within the hook block itself may be loose.
• 3. Troubleshooting Steps:
  1. Inspect the hook assembly. Check the latch operation. It should move freely but sit snugly against the tip of the hook.
  2. Check for loose parts. Shake the hook block (with the crane de-energized) to listen for internal rattling.
  3. Action: Repair or replace the damaged latch. If the rattling is internal, the hook block must be inspected and repaired by a professional.

Your Proactive Noise Prevention Checklist

The best troubleshooting is the troubleshooting you never have to do.

• 1. Stick to the Schedule: Adhere rigorously to the manufacturer’s recommended preventive maintenance (PM) schedule. This is non-negotiable.
• 2. Lubricate Religiously: Use the right type and amount of grease at all specified points. Proper lubrication prevents 80% of common problems.
• 3. Visual Inspections: Make pre-shift inspections a habit. Recherchez des signes d'usure, damage, and debris before you even turn the crane on.
• 4. Listen Actively: Operators are your first line of defense. Encourage them to report any new or unusual sounds immediately.
• 5. Call a Professional: For any noise that indicates internal damage (grinding, internal rattling), or if you are unsure of the cause, stop use and contact a certified crane technician. Safety must always come first.

Don’t let a noisy hook block bring your operation to a screeching halt. By listening carefully and acting promptly, you can diagnose issues early, ensure the safety of your personnel, protect your valuable equipment, and maintain the smooth, silent efficiency that every worksite depends on.