บ้าน » บล็อก » 400 Ton Overhead Crane Used at a Hydropower Station in Tanzania

400 Ton Overhead Crane Used at a Hydropower Station in Tanzania

2026-11-18

400 ton overhead crane used at a hydropower station in Tanzania

400/80 ton overhead crane used at a hydropower station in Tanzania

ความเป็นมาของโครงการ

Julius Nyerere Hydropower Station, located on the Rufiji River in Tanzania, is the country’s largest hydropower project and one of the landmark energy infrastructure projects in East Africa. With a total installed capacity of 2115 MW and nine 235 MW Francis turbine-generator units, the power station is designed to greatly lift Tanzania’s national power supply capacity, support local industrial development and stabilize the regional power grid. The powerhouse requires heavy-duty lifting equipment for the installation, overhaul and maintenance of turbine runners, เครื่องกำเนิดไฟฟ้า, transformers and other core heavy electromechanical components. To meet the heavy-lifting demands inside the powerhouse, a customized 400 ton overhead crane was deployed for this critical project.

Site Challenges

The project site presents multiple harsh operating conditions that raise high requirements for crane design:

400/80 ton overhead crane used at a hydropower station in Tanzania

400/80 ton overhead crane used at a hydropower station in Tanzania

Crane Solution & Main Specifications

This double-girder 400 ton overhead crane is specially engineered for hydropower powerhouse heavy lifting scenarios.

400/80 ton overhead crane used at a hydropower station in Tanzania

400/80 ton overhead crane used at a hydropower station in Tanzania

แอปพลิเคชัน & On-site Performance

ที่ 400 ton overhead crane undertakes the core heavy-lifting work inside the powerhouse of Julius Nyerere Hydropower Station. It is responsible for the hoisting, transportation and accurate alignment of turbine and generator components during the construction phase. After the station enters commercial operation, the crane serves as the key maintenance equipment for dismounting and reinstalling large rotating parts during scheduled overhaul.

นับตั้งแต่เริ่มดำเนินการ, the crane has delivered stable, reliable and precise lifting performance. Its anti-sway control greatly improves positioning accuracy when mating large precision equipment. The tropical-adapted structure reduces failure risks under humid and hot environment, cutting downtime and maintenance cost for the power plant owner TANESCO. It has become an indispensable heavy-lifting asset guaranteeing smooth construction and long-term safe operation of this flagship Tanzanian hydropower project.

ค่า & บทสรุป

ที่ 400 ton overhead crane used at the hydropower station in Tanzania provides a proven heavy-lifting solution for Julius Nyerere Hydropower Station. It matches the extreme lifting requirements of large hydropower generating units, adapts to Africa’s tough tropical working environment, and supports the successful delivery and reliable operation of Tanzania’s largest hydropower asset. This case demonstrates mature heavy เครนเหนือศีรษะ technology applied to African hydropower EPC projects, and proves the reliability of customized heavy lifting equipment for large-scale clean energy infrastructure.

โรงงานเว่ยหัว

บทความก่อนหน้า:
ไม่มีอีกต่อไป, เป็นบทความใหม่ล่าสุดแล้ว

Get Solution & Price Right Now!

เราให้ความสำคัญกับความคิดเห็นของคุณ! กรุณากรอกแบบฟอร์มด้านล่างเพื่อให้เราสามารถปรับแต่งบริการของเราให้ตรงกับความต้องการเฉพาะของคุณ.

ชื่อ:
* อีเมล:
Whatsapp / หมายเลขโทรศัพท์:
ที่ตั้งโครงการ:
* ข้อความ:

ความคิดเห็นล่าสุด

เวียเชสลาฟกล่าวว่า:
ปัจจุบันสะสมสำหรับเครน EOT
เจา ดันตัส กล่าว:
สวัสดี, เรากำลังมองหาตัวนำทางลวดสลิงทดแทนสำหรับ GH ที่มีอยู่ / เครนเหนือศีรษะของ Univiga. ข้อมูลที่มีอยู่: * ผู้ผลิตเครน: GH / ข้อผิดพลาดของยูนิ * ความจุของเครน: 3.2 ตัน * รอก / การอ้างอิงคู่มือเชือก: GHA12 * เชือกนำด้าย: มือซ้าย * เส้นผ่านศูนย์กลางภายนอกโดยประมาณ: 207 มม. * ความกว้างโดยประมาณ: 50 มม. * ปริมาณ: 1 pc The original GH spare part has a very long lead time, ดังนั้นเราจึงกำลังมองหาสิ่งทดแทนที่เข้ากันได้. ไม่จำเป็นต้องเป็นส่วน GH ดั้งเดิม. สามารถใช้เชือกนำทางที่เข้ากันได้หรือผลิตขึ้นเองได้, โดยมีเงื่อนไขว่ามิติ, ทิศทางเกลียวและการติดตั้งเหมาะสำหรับรอก GHA12 ที่มีอยู่. ขณะนี้เรากำลังขอรูปถ่ายคู่มือเชือกดั้งเดิม, แผ่นป้ายดรัมและเครนจากลูกค้าของเราและสามารถส่งไปประเมินทางวิศวกรรมของคุณได้. บริษัทของคุณสามารถผลิตหรือจัดหาตัวกั้นลวดสลิงที่เข้ากันได้สำหรับการใช้งานนี้ได้หรือไม่? ขอบคุณ.
ฮัก 100 ตัน กล่าว:
กรุณาเสนอราคาสำหรับเบ็ด 100 ตัน.
เอเดรียน เปญ่า กล่าว:
ฉันต้องการตะขอ (สไตล์คู่) ความจุ 25 เมตริกตัน. กับ 4 มัด (14" มัดเส้นผ่านศูนย์กลาง) เส้นผ่านศูนย์กลางของเชือกลวด: 5/8"
เทสฟาเย เมเลเซ กล่าวว่า:
40 ชุดรถเข็นเครนเหนือศีรษะคานคู่ตันพร้อมอุปกรณ์ไฟฟ้าและเครื่องกลเต็มรูปแบบ

กรณีที่เกี่ยวข้อง

Whatsapp

ติดต่อเรา

คลิกปุ่มเพื่อรับข้อมูลผลิตภัณฑ์และคำพูดบน WhatsApp.

รับใบเสนอราคา
Whatsapp
การสอบถาม