Domov » Blog » 400 Ton Overhead Crane Used at a Hydropower Station in Tanzania

400 Ton Overhead Crane Used at a Hydropower Station in Tanzania

2026-11-18

400 ton overhead crane used at a hydropower station in Tanzania

400/80 ton overhead crane used at a hydropower station in Tanzania

Pozadie projektu

Julius Nyerere Hydropower Station, located on the Rufiji River in Tanzania, is the country’s largest hydropower project and one of the landmark energy infrastructure projects in East Africa. With a total installed capacity of 2115 MW and nine 235 MW Francis turbine-generator units, the power station is designed to greatly lift Tanzania’s national power supply capacity, support local industrial development and stabilize the regional power grid. The powerhouse requires heavy-duty lifting equipment for the installation, overhaul and maintenance of turbine runners, generátory, transformers and other core heavy electromechanical components. To meet the heavy-lifting demands inside the powerhouse, a customized 400 ton overhead crane was deployed for this critical project.

Site Challenges

The project site presents multiple harsh operating conditions that raise high requirements for crane design:

400/80 ton overhead crane used at a hydropower station in Tanzania

400/80 ton overhead crane used at a hydropower station in Tanzania

Crane Solution & Main Specifications

This double-girder 400 ton overhead crane is specially engineered for hydropower powerhouse heavy lifting scenarios.

400/80 ton overhead crane used at a hydropower station in Tanzania

400/80 ton overhead crane used at a hydropower station in Tanzania

Aplikácia & On-site Performance

The 400 ton overhead crane undertakes the core heavy-lifting work inside the powerhouse of Julius Nyerere Hydropower Station. It is responsible for the hoisting, transportation and accurate alignment of turbine and generator components during the construction phase. After the station enters commercial operation, the crane serves as the key maintenance equipment for dismounting and reinstalling large rotating parts during scheduled overhaul.

Od uvedenia do prevádzky, the crane has delivered stable, reliable and precise lifting performance. Its anti-sway control greatly improves positioning accuracy when mating large precision equipment. The tropical-adapted structure reduces failure risks under humid and hot environment, cutting downtime and maintenance cost for the power plant owner TANESCO. It has become an indispensable heavy-lifting asset guaranteeing smooth construction and long-term safe operation of this flagship Tanzanian hydropower project.

Hodnota & Záver

The 400 ton overhead crane used at the hydropower station in Tanzania provides a proven heavy-lifting solution for Julius Nyerere Hydropower Station. It matches the extreme lifting requirements of large hydropower generating units, adapts to Africa’s tough tropical working environment, and supports the successful delivery and reliable operation of Tanzania’s largest hydropower asset. This case demonstrates mature heavy mostový žeriav technology applied to African hydropower EPC projects, and proves the reliability of customized heavy lifting equipment for large-scale clean energy infrastructure.

Továreň Weihua

Predchádzajúci článok:
Už nie, už je to najnovší článok

Get Solution & Price Right Now!

Ceníme si vašu spätnú väzbu! Vyplňte prosím nižšie uvedený formulár, aby sme mohli naše služby prispôsobiť vašim špecifickým potrebám.

Meno:
* Email:
Whatsapp / Telefónne číslo:
Miesto projektu:
* Správa:

Najnovšie komentáre

Povedal Vjačeslav:
Zberač prúdu pre EOT žeriav
Povedal João Dantas:
Dobrý deň, Hľadáme náhradné vedenie drôteného lana pre existujúce GH / Mostový žeriav Univiga. Dostupné informácie: * Výrobca žeriavov: GH / Uni chyba * Kapacita žeriavu: 3.2 ton * Zdvihák / odkaz na vedenie lana: GHA12 * Vodiaci závit lana: Ľavá ruka * Približný vonkajší priemer: 207 mm * Približná šírka: 50 mm * Množstvo: 1 pc The original GH spare part has a very long lead time, preto hľadáme kompatibilnú náhradu. Nemusí to byť originálny diel GH. Je prijateľné kompatibilné alebo na mieru vyrobené vedenie lana, za predpokladu, že rozmery, smer závitu a inštalácia sú vhodné pre existujúci kladkostroj GHA12. Momentálne požadujeme fotografie pôvodného vedenia lana, štítok bubna a žeriavu od nášho zákazníka a môžeme ich poslať na vaše technické posúdenie. Môže vaša spoločnosť vyrobiť alebo dodať kompatibilné vedenie oceľového lana pre túto aplikáciu? dakujem.
Hak 100ton Said:
Prosím o ponuku na háčik 100 ton.
Povedal ADRIAN PEÑA:
Potrebujem háčik (dvojitý štýl) kapacita 25 metrických ton. s 4 snopy (14" priemer snopov) priemer drôteného lana: 5/8"
Povedala Tesfaye Melese:
40 Zostava mostového žeriavového vozíka s dvojitým nosníkom s úplným elektrickým a mechanickým príslušenstvom

Súvisiace prípady

WhatsApp

Kontaktujte nás

Kliknutím na tlačidlo získate informácie o produkte a cenové ponuky na WhatsApp.

ZÍSKAJTE CENU
Whatsapp
Dopyt