45 ton rail mounted container gantry crane: 6+1 row span, 1-over-5 stacking, 20/40 ft telescopic spreader, VFD anti-sway, automation-ready.
الف 45 ton rail mounted container gantry crane (RMG) moves laden and empty 20 فوت / 40 ft containers inside rail container yards, dry ports and multimodal terminals. The crane travels on fixed rails laid along the yard, lifts containers with a telescopic spreader, and transfers them between rail wagons, truck lanes and stack areas. Fully electric and rail-bound, it delivers higher positioning accuracy and a smaller operating footprint than rubber-tyred cranes on the same layout.

45 جرثقیل دروازه ای کانتینری ریلی تن

Container spreader
در 45 t capacity is sized for single-container handling of a fully loaded 40 ft container under the spreader — the most common load case in railway and inland container traffic. With a tandem-configured spreader, دوقلو 20 ft lifting is also available.
| پارامتر | مشخصات |
|---|---|
| ظرفیت بلند کردن امتیاز | 45 t under spreader |
| پخش کننده | Telescopic, 20 فوت / 40 فوت, automatic twist locks |
| دهانه (متریک) | 18 - 40 مگس, per yard layout |
| دهانه (ردیف های کانتینر) | 4+1 به 7+1 ردیف ها |
| ارتفاع بلند کردن (متریک) | 12.2 - 18.5 مگس |
| ارتفاع بلند کردن (انباشته شدن) | 1-over-4 to 1-over-5 |
| سرعت بالا بردن | Loaded ≈ 12 m/my; empty ≈ 25 m/my |
| سرعت حرکت چرخ دستی | ≈ 60 - 80 m/my |
| Gantry travel speed | ≈ 90 - 120 m/my |
| منبع تغذیه | 380 حرفهای / 50 هرتز, cable reel or conductor rail |
| Control system | PLC + درایو فرکانس متغیر, تاکسی + ریموت رادیویی |
| Safety devices | محافظت بیش از حد, گیره های ریلی, wind-speed alarm, ضد برخورد, سوئیچ های محدودیت سفر |
Values shown are typical references; final speeds, spans and heights are configured to the specific track layout and stacking plan.

45 جرثقیل دروازه ای کانتینری ریلی تن
Typical duty: مجرد 40 ft or twin 20 کانتینر فوت, 5-high stacking, تا 7 container rows plus truck lane, operating 24/7 in open-air yards.

45 جرثقیل دروازه ای کانتینری ریلی تن
Q1: What does the span “6+1 rows” mean?
الف: Six container rows under the gantry plus one truck lane. If your drawings show dimensions in metres, the same span is quoted in metric form — the two expressions are interchangeable.
Q2: What does lifting height “1-over-5” mean?
الف: The crane stacks containers five high and can pick one more over a truck or wagon passing beneath. In metres, it is the distance from the rail top to the spreader at maximum height.
Q3: Which containers can the crane handle?
الف: 20 ft and 40 ft ISO containers with the telescopic spreader; دوقلو 20 ft lifting is available on request. در 45 t capacity covers a fully loaded 40 ft container.
Q4: What power supply does the crane use?
الف: استاندارد 380 حرفهای / 50 Hz via cable reel or conductor rail; other voltages and frequencies can be provided.
Q5: Can the crane be automated?
الف: بله. The control system carries a remote interface for TOS and semi-automatic cycles; full automation can be added later without replacing main machinery.
Q6: What is the difference between an RMG and an RTG?
الف: An RMG runs on fixed steel rails and is fully electric, giving precise positioning and lower cost per move; an RTG travels on tyres and is more flexible across the yard but less precise.
ما برای بازخورد شما ارزش قائل هستیم! لطفاً فرم زیر را تکمیل کنید تا بتوانیم خدمات خود را متناسب با نیازهای خاص شما تنظیم کنیم.
بررسی اجمالی محصول گنتری لاستیکی تایر (RTG) جرثقیل ها تجهیزات ضروری جابجایی مواد هستند……
بیشتر کشف کنید →
به طور خاص برای نیازهای سخت پردازش فلز طراحی شده است, خودروسازی ……
بیشتر کشف کنید →
در دنیای سختگیرانه حمل و نقل مواد, ساخت و ساز, و وزنه برداری, هر کامپ……
بیشتر کشف کنید →
برای به دست آوردن اطلاعات محصول و نقل قول های موجود در WhatsApp روی دکمه کلیک کنید.
نقل قول
آخرین نظرات