Domov » Blog » 400 Ton Overhead Crane Used at a Hydropower Station in Tanzania

400 Ton Overhead Crane Used at a Hydropower Station in Tanzania

2026-11-18

400 ton overhead crane used at a hydropower station in Tanzania

400/80 ton overhead crane used at a hydropower station in Tanzania

Pozadí projektu

Julius Nyerere Hydropower Station, located on the Rufiji River in Tanzania, is the country’s largest hydropower project and one of the landmark energy infrastructure projects in East Africa. With a total installed capacity of 2115 MW and nine 235 MW Francis turbine-generator units, the power station is designed to greatly lift Tanzania’s national power supply capacity, support local industrial development and stabilize the regional power grid. The powerhouse requires heavy-duty lifting equipment for the installation, overhaul and maintenance of turbine runners, generátory, transformers and other core heavy electromechanical components. To meet the heavy-lifting demands inside the powerhouse, a customized 400 ton overhead crane was deployed for this critical project.

Site Challenges

The project site presents multiple harsh operating conditions that raise high requirements for crane design:

400/80 ton overhead crane used at a hydropower station in Tanzania

400/80 ton overhead crane used at a hydropower station in Tanzania

Crane Solution & Main Specifications

This double-girder 400 ton overhead crane is specially engineered for hydropower powerhouse heavy lifting scenarios.

400/80 ton overhead crane used at a hydropower station in Tanzania

400/80 ton overhead crane used at a hydropower station in Tanzania

Aplikace & On-site Performance

The 400 ton overhead crane undertakes the core heavy-lifting work inside the powerhouse of Julius Nyerere Hydropower Station. It is responsible for the hoisting, transportation and accurate alignment of turbine and generator components during the construction phase. After the station enters commercial operation, the crane serves as the key maintenance equipment for dismounting and reinstalling large rotating parts during scheduled overhaul.

Od uvedení do provozu, the crane has delivered stable, reliable and precise lifting performance. Its anti-sway control greatly improves positioning accuracy when mating large precision equipment. The tropical-adapted structure reduces failure risks under humid and hot environment, cutting downtime and maintenance cost for the power plant owner TANESCO. It has become an indispensable heavy-lifting asset guaranteeing smooth construction and long-term safe operation of this flagship Tanzanian hydropower project.

Hodnota & Závěr

The 400 ton overhead crane used at the hydropower station in Tanzania provides a proven heavy-lifting solution for Julius Nyerere Hydropower Station. It matches the extreme lifting requirements of large hydropower generating units, adapts to Africa’s tough tropical working environment, and supports the successful delivery and reliable operation of Tanzania’s largest hydropower asset. This case demonstrates mature heavy mostový jeřáb technology applied to African hydropower EPC projects, and proves the reliability of customized heavy lifting equipment for large-scale clean energy infrastructure.

Továrna Weihua

Předchozí článek:
Už už, Je to již nejnovější článek

Get Solution & Price Right Now!

Vážíme si vaší zpětné vazby! Vyplňte prosím níže uvedený formulář, abychom mohli přizpůsobit naše služby vašim konkrétním potřebám.

Jméno:
* E-mail:
Whatsapp / Telefonní číslo:
Umístění projektu:
* Zpráva:

Nejnovější komentáře

Řekl Vjačeslav:
Sběrač proudu pro EOT jeřáb
Řekl Joao Dantas:
Ahoj, Hledáme náhradní vedení ocelového lana pro stávající GH / Mostový jeřáb Univiga. Dostupné informace: * Výrobce jeřábů: GH / Uni chyba * Kapacita jeřábu: 3.2 tuny * Vztyčit / odkaz na vedení lana: GHA12 * Vodící závit lana: Levá ruka * Přibližný vnější průměr: 207 mm * Přibližná šířka: 50 mm * Množství: 1 pc The original GH spare part has a very long lead time, proto hledáme kompatibilní náhradu. Nemusí to být originální díl GH. Je přijatelné kompatibilní nebo na zakázku vyrobené vedení lana, za předpokladu, že rozměry, směr závitu a instalace jsou vhodné pro stávající kladkostroj GHA12. V současné době požadujeme fotografie původního vedení lana, štítek bubnu a jeřábu od našeho zákazníka a můžeme je poslat k vašemu technickému posouzení. Může vaše společnost vyrobit nebo dodat kompatibilní vedení ocelového lana pro tuto aplikaci? Děkuju.
Hak 100ton Said:
Prosím o nabídku na háček 100 tón.
ADRIAN PEÑA řekl:
Potřebuji háček (dvojitý styl) kapacita 25 metrických tunách. s 4 snopy (14" průměr kladek) průměr drátěného lana: 5/8"
Řekla Tesfaye Melese:
40 Sestava mostového jeřábu s dvojitým nosníkem Tun s kompletním elektrickým a mechanickým příslušenstvím

Související případy

Whatsapp

Kontaktujte nás

Kliknutím na tlačítko získáte informace o produktu a nabídky na WhatsApp.

Získejte citát
Whatsapp
Dotaz